We take pride in presenting to you our range of products. We have enhanced numerous of their features, and their range of applications are manifold.
Our Products - A Quick Glance!
Purchasing products here is a simple 3-step process
Our Pride
High Efficiency Electric Furnace – BM-1705 HI
Features
HEATCON BM series box furnaces are the most cost effective bench-top high temperature muffle furnace. The furnace consists of high quality alumina fiber brick and MoSi2 heating elements with special design, and furnace temperature is controlled by high precision SCR (Silicon Controlled Rectifier) digital controller with accuracy +/-1oC and 30 segments programmable. It is an ideal tool for materials annealing and sintering in your research laboratory.
High Temperature Furnaces – TF-1601 HI
Features
HEATCON TF series tube furnace is a precision bench –top furnace using quality ceramic MoSi2 rods as heating elements. It is widely used for materials or chemical lab to sinter all types of new materials samples under vacuum or other gases condition. It is controlled by high precision SCR and digital controller with accuracy +/-1oC and 30 segments programmable up to 1800 o C.
Analog Thyristor Power Controllers HI-8003 -TP-C3-ED
Features
- SOFT START & SOFT END: In soft start the output is given to the load in an exponential way. This character prevents excess inrush current to the heaters or transformers. This feature increases the life of the load.
- OVER-LOAD TRIP: OVER-LOAD trip can be adjustable from 110% to 200% of the rated output value. If OVER-LOAD occurs the output is disabled.
- AUTOMATIC RESET: When OVER-LOAD trip happens, after three seconds delay thyristor again starts normally and provides output. If OVER-LOAD trip happens more than three times with in 10mins, the output is disabled permanently.
- RESET SWITCH : If any problem occurs in the output or input, and output is disabled, then hootter goes on. At this stage rectify the problem and press the reset switch.
- ENABLE SWITCH: Optional Enable Switch is also provided.
9002 PID48 / 45 X 45 mm – PID Controller Based Temperature Controller
PID Controllers
- Available seven segment displays : 0.3 inch
- First 4 seven segments (Red displays), displays PV(Present Value)
- Second 4 seven segments (Green displays),displays SV(Set Value)
- Available in Relay Output ,SSR Output, and current output modes
- The sensors used are thermocouples (J, K, R, S, T, B, N-Types), andpt-100.
(DTC) HI – 8006 – Temperature Controller of Press Set Module Type
Features
- Two set values
- Two relays
- ½ inch display(Red) showing present values
- Size: 90X90
High Temperature Furnaces – TF-1601 HI
Features
HEATCON TF series tube furnace is a precision bench –top furnace using quality ceramic MoSi2 rods as heating elements. It is widely used for materials or chemical lab to sinter all types of new materials samples under vacuum or other gases condition. It is controlled by high precision SCR and digital controller with accuracy +/-1oC and 30 segments programmable up to 1800 o C.
Induction Heaters – HS-IH1003
High Frequency Indication Heating Machine Features
- Melting time: 5 - 20 minutes
- Efficient IGBT based Induction Furnace
- Portable module
- Soft switching technology for power saving
- Robust Industrial design for high and low volume melting
- Steel frame construction and Auto shut feature on fault condition
- Jewellery application such as melting of precious metals like gold, silver, copper etc...
- Melting of various alloys for laboratory purposesHeat treatment of metal parts and research applications Purification of Silicon
Humidity Control – HI-9020-BD
Heatcon temperature –humidity controller not only indicates the present temperature and humidity but also controls both at the the same time.
FEATURES
- Temperature is displayed on the upper LED display(RED) with ½inch and humidity on the lower LED display (Green) with ½ inch
Humidity Controllers – HI-9020-Tr
Heatcon temperature –humidity controller not only indicates the present temperature and humidity but also controls both at the the same time.
FEATURES
- Temperature is displayed on the upper LED display(RED) with ½inch and humidity on the lower LED display (Green) with ½ inch
Humidity Controller – HI-9020
Heatcon temperature –humidity controller not only indicates the present temperature and humidity but also controls both at the the same time.
FEATURES
- Temperature is displayed on the upper LED display(RED) with ½inch and humidity on the lower LED display (Green) with ½ inch
HI-9002M / 68 X 68 mm – Temperature Sensor
PV.SV ON/OFF Controllers
- Available Seven segment display sizes: 0.56 inch(PV) & 0.39 inch(SV)
- Using 8 seven segment displays
- First 4 seven segments (Red displays), displays PV(Present Value or process value)
- Second 4 seven segments (Green displays),displays SV(Set Value or Source value)
- Available 2 Set value outputs: Relay Output or SSR Output modes
- Available in 5 Sizes
- The sensors used in universal: thermocouples (J, K, R, S, T, B, N-Types), and pt-100.
HI-9002 / 90 X 90 mm – Digital Temperature Controller
PV.SV ON/OFF Controllers
- AvailableSeven segment display size: 0.56 inch
- Using 8 seven segment displays
- First 4 seven segments (Red displays), displays PV(Present Value or process value)
- Second 4 seven segments (Green displays),displays SV(Set Value or Source value)
- Available 2 Set value outputs: Relay Output or SSR Output modes
- Available in 5 Sizes
- The sensors used in universal: thermocouples (J, K, R, S, T, B, N-Types), and pt-100.
HI-9002-45H / 45 X 90 mm – Temperature Controller
PV.SV ON/OFF Controllers
- Available Seven segment display size: 0.3 inch
- Using 8 seven segment displays
- First 4 seven segments (Red displays), displays PV(Present Value or process value)
- Second 4 seven segments (Green displays),displays SV(Set Value or Source value)
- Available 2 Set value outputs: Relay Output or SSR Output modes
- Available in 5 Sizes
- The sensors used in universal: thermocouples (J, K, R, S, T, B, N-Types), and pt-100.
HI-9002-45 V/ 90 X 45 mm – Temperature Controller On/Off Type
PV.SV ON/OFF Controllers
- Available Seven segment display size: 0.3 inch
- Using 8 seven segment displays
- First 4 seven segments (Red displays), displays PV(Present Value or process value)
- Second 4 seven segments (Green displays),displays SV(Set Value or Source value)
- Available 2 Set value outputs: Relay Output or SSR Output modes
- Available in 5 Sizes
- The sensors used in universal: thermocouples (J, K, R, S, T, B, N-Types), and pt-100.
HI-EC10002 / 45 X 45 mm – Custom Made Temperature Controller
Economic Controllers
- Available 4 Seven segment display sizes : 0.3 inch.
- Available in any one of the output modes : Relay or SSR Output modes.
EASE OF SELECTION
We have segregated our products into various categories for your convenience. A particular category will give you clues as to the end application of the products listed under it.
LATEST FROM OUR BLOG
Articles in relation to technology that make an interesting read. Check them out!
Recent Comments